Sharia Exports

GREENTECH Make hydraulically operated SKID mounted Manual Rig Mounting Model GT 400, capable of drilling max 6”-12” dia for DTH operation by using Suitable Air Compressor and DTHR operation by using Mud Pump up to depth of 400 Mtrs in favorable soil formation. Capacity of drilling depend on soil formation and size of bore hole dia.

Scope of Supply:-

-           Sturdy Structural Channel Mast with 15 Ft Rod handling capacity

-           Hydraulic Oil Cooler

-           Complete Hydraulic Circuit power from separate deck engine through PTO arrangement

-             Rotary Head Gear Box with OMT 315 Hy. Motors – 2 no’s

-             Water Injection Pump – 120 LPM

-           Dia. 140 mm Stabilizers – 4 Nos

-             Dia. 180 mm main mast cylinder – 01 No

-             Dia. 160 mm MRC Jack

-              Hydraulic Winch of 1 Ton capacity

-              Hydraulic Welding Gen. Set 200 Amh

-             14” Rotary table

-             Two stage pump 21 / 12 Gallons HYDRANK MAKE – 01 no

-           Single stage 65 Gallons main pumps PERMCO MAKE - 02 nos Parker commercial main valves

-              Hammer clamp fittings

-           5 mm chequered plate covered platform

-           Coloring 400-500 ltrs capacity of oil,water and diesel tanksØ

-           Hydraulic Deck engine :- Ashok Leyland make Hino 188 HP Model for hydraulic circuit power through PTO arrangement alongØ with (used) old engine gear box.

-           Mud Pump :- 8” X 6” Mud Pump hydraulic driven Reputed

-           make OMV Series 400 hydraulic motor Single spool Hydraulic valve Single stage 50 Gallons hydraulic pump

-           Drilli.ng Hammer Bit Set – 3 nos

IR Doosan Make Used 2014 Diesel Driven Skid Mounted Screw Air Compressor

Description Specifications

Compressor Model PA 415-ATC

Capacity (Free Air Delivery) 1200 Cfm (31.1 m3/ min)

Maximum working pressure 320/340 PSI (24.5/28 Kg/ cm2)

No. of stages Double

Cooling system Air Cooled

Engine Cummins NTA 855BCII

Additional Information:

• Item Code: 415ATC
• Delivery Time: 20DAYS

Additional Information:

• Delivery Time: 20 days

Additional Information:

• Delivery Time: 4 WEEKS

This range of compressors are ideal for mounting on drill rigs or utility trucks and suited for  applications like water well drilling. ELGi is one of the few companies in the world to offer the full line of single and two stage compressors in this range. ELGi compressors are widely used by drill rig OEMs globally.

Features:

• Forklift slots provided for ease of placing unit on a utility truck or drill rig unit
• Centralized control panel for ease of use
• Engines come with international warranty
• Large access doors for ease of maintenance
• Complete range covering single stage models up to 250 psi and two stage models above 250 psi
• Industrial grade steel and powder coated canopy for maximum corrosion protection and durability
• Energy efficient eta V profile air ends
• Highly reliable and works in the most demanding of work sites

• CBM/oil & gas exploration
• Construction & mining
• Water well drilling

• The filtration system in two stages prevents dust from entering into the compressor and the engine. The compressor is hence ideal for operations in dusty conditions.

• Three-stage air/oil separator effectively separates oil from air. This three-stage system ensures maximum oil recovery to minimize lube oil consumption and maintenance cost.

• The 0-100% stepless variable capacity control reduces fuel consumption and operating costs. End use air consumption controls the opening and closing of the butterfly valve, thereby regulating inlet air suction and matching engine speed to air demand.This feature allows to save fuel and spend only for the air used.

• ELGi rig compressor is specially designed to perform at wide ambient temperatures from hot summer to cold winter and from dry to extremely humid conditions.

• Industrial grade steel and powder coated canopy provides maximum corrosion protection and ensure longer life of the unit. The rig compressor can thus withstand the tough work site demands of water-well drilling industry.

• ELGi’s genuine and economical spare parts help customers to keep operating costs to the minimum.With ELGi genuine spares,the issues of unexpected compressor failures and the risk of consequential damage to other vital compressor components are avoided. ELGi offers a full range of high efficiency separators, oil filter elements and airends for its compressed air equipment.

• ELGi has developed special compressor oil with good thermal and oxidation stability
• to ensure that the compressor continues to run smoothly
• ELGi AIRLUBE with drain interval with an assured life of 500 hours
• ELGi AIRLUBE Plus, a premium mineral oil, with drain interval of 750 hours for
• screw air compressors

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Delivery Time: 15 Days

• CAPACITY

A skid mounted rig with hydraulic top drive rotary head cap able of drilling in all kind of formation with air / foam / mud with the following capacity: -DTHDrilling : 4.5" to 6" up to 600mtr Rotary Drilling: 8” to 10" up to 600 mtr (by reaming method)However, the drilling depth capacities indicated are subjected to favorable site condition and capacity of compressor.

• MOUNTING:

The rig unit is mounted with oil tank, water tank, PTO g ear box, Mast and other required tools as a skid platform.

• HYDRAULIC SYSTEM:

The hydraulic system driven by a Suitable deck Engine through PTO gear box and this consists of the hydraulic reservoir, pumps, motors , valves, cylinders, jacks,filters hoses and hydraulic oil cooler for increasing life of the hydraulic components. The hydraulic reservoir capacity is 800 liters.The hydraulic system actuates the twin motor rotary head, the feed system, leveling jacks, mast raising cylinders and break out wrench.

• MAINFRAME:

Sturdy structural steel construction incorporates hydraulic control panel mast raising cylinder, control panel for the hydraulic systems and drill stand.

• ROTARY HEAD:

Hydraulic Motor driven rotary head drive is fitted with internal gears to give maximum torque an d minimum RPM. Main spindle of the rotary head drive is dynamically balanced to ensure vibration less operation.

• MAST:

Made from MS 'C' channel this is hydraulically moveable. High alloy electrode welded to get maximum strength. Length of mast is 2 7' with 14" ID of guide table which is suitable for 20' casing pipe. The mast is raised and lowered by two heavy mast rising cylinder (140mm x 90mm). The gross lo ad capacity of the mast is 70,000 kgs.

• FEED SYSTEM:

The feed system shall be actuated through two hydraulic cylinders and rope revving system of 1:3 ratio. Rapid and slow speed with micro feed arrangement shall be provided with suitable regulating valve.

• LEVELING JACKS:

4 Nos. hydraulic leveling jacks (140 x 90 x 780 mm) provided for quick setting and leveling with heavy duty telescopic guides and locking check valves for safety with adequate e capacity to withstand load.

• BREAK OUT WRENCH:

Hydraulic o perated break out wrench (100mm x 63mm) is provided for fast breaking of rod joints.

• AIR LINE LUBRICATOR/ LINEOILER:

A positive acting line lubricator is provided for injecting oil in the compressed air system complete with oil reservoir for lubricating the working of pneumatic tools

• HYDRAULIC SYSTEM:

Oil tank capacity : 800 Liters.
Hydraulic Pump : 160c c piston pump-02nos, 200cc Gear pump-01no and 21 G.P.M of small pump for the leveling jack and mast operation.
Hydraulic Motor: 80c c piston motor-02Nos with pantry gear box with high torque gear box.
Filters: Suction: 25 Microns, Return: 25 micron.Pressure gauges. Each function has separate gauges on control Panel.
Directional control valves: Wolviline /Budesnost (Italy)

• WELDING SET:

Welding gen-set of400AMP make ashok for the long time work with smooth operation.

• WATER PUMP:

120lmp water pump f or form injection at the time of drilling driven by hydraulic motor.

• INCLUDED SPEARS:

1Hammer Guide1no.
2.Rod Guide1no.
3.Rod spanner1no.
4.Hammer spanner1no.
5.Rod Carrierwith pin1no.
6.Rod adaptor1no.

Additional Information:

• Delivery Time: 15 DAYS

SKID MOUNTED MUD PUMPS is the result of over two decades of incessant research and development by a young team of pains taking engineers, working with an India-can-do- its mood. They are backed by their close association with advanced pump technology and actual on the field experience. SKID MOUNTED MUD PUMPS are double acting, piston reciprocating type, specially designed to handle high pressure high discharge application. They have many in-built design and construction features to ensure high efficiency with an eye on economy.

SKID MOUNTED MUD PUMPS are suitable for a wide range of application. They are ideal seismograph survey, water well and core drilling operation, mud and cement services, in shallow crude oil-well drilling. They are also use for water supply, boiler feed and general industrial services.

Typical application also include oil line pumping , chemical and petroleum product transfer line, dewatering and wash down service on oil field rigs, other common uses are in water flooding , water blast services, et

Additional Information:

• Delivery Time: 15 DAYS